Dakota Alert Wireless Probe Alert 3000

Dakota Alert WPA-3000 Wireless Probe Driveway Alarm

How does it work?
The all new Wireless Probe Drive Alert 3000 uses a Vehicle Detection Probe Sensor to detect cars and vehicles. When a vehicle is detected, the transmitter sends a wireless signal back to the receiver, which will then emit a pleasant chime sound.

Transmitter: The transmitter, which operates on 9 AA Batteries, is connect to the probe with 50 feet of burial wire. The magnetic metal sensing probe can be buried along side the driveway and will detect vehicles passing by within about 10 to 12 feet. The direct burial cable can be run to a tree or post nearby where the transmitter box is located. When a vehicle drives by, the transmitter will send a signal to the WR 3000 receiver up to 600 feet away*. Standard system comes with 50' cable connecting probe to transmitter box.

Need more cable? Check out the Dakota Alert Probe with several lengths. Just choose your length, transmitter and receivers to build your own custom kit!

Dakota Alert WPA-3000 Wireless Probe Driveway Alarm - Specifications

Probe Driveway Sensor and Wireless Transmitter

• Frequency: 433.92 MHz
• Operating range: -30˚F to 110˚F
• Battery life: 12 months
• Reset time: 15 seconds
• Power Source: 12V (9 AA Batteries Required)
• Operating Temperature Range: -30°F to 110°F
• Wireless Range: 600 feet

Wireless Driveway Chime

• Frequency: 433.92 MHz
• Operating voltage: 12VDC
• 12 volt DC output current: 400 mA maximum
• Relay output rating: 24VDC at 3A

Dakota Alert WPA-3000 Wireless Probe Driveway Alarm - Included

• 1 - Dakota Alert Wireless Probe Sensor with 50' of wire (Click HERE for the probe with additional lengths)
• 1 - Dakota Alert Wireless Chime Receiver
• 1 - 12V Power Supply for Chime Receiver

Dakota Alert WPA-3000 Wireless Probe Driveway Alarm - Support and Downloads

• Dakota Alert Receiver Manual
• Dakota Alert Wireless Probe Sensor Manual
• Driveway Alarm Accessories List