|
|
Enforcer Voice Dialer
|
Model Number: SLE920B
Manufacturer: Seco Larm
Manufacturer Part No: E920B
|
|
|
|
Enforcer Voice Dialer - Description
The Enforcer Voice Dialer automatically dials up to four telephone numbers and delivers up to two different messages when triggered by an alarm system.
Features:
- Two independent voice messages.
- Stores up to four telephone numbers, cellular numbers or pager numbers.
- Delivers a message of up to 16 seconds to each number stored.
- Instant trigger or exit and entry delay settings.
- Repeats the voice message for one minute per call.
- Waits 8 to 10 rings before dialing the next programmed number.
- Calls two times when there is no answer or three times when the line is busy.
- EEPROM retains memory if power is lost for up to one year.
- Optional 9-Volt internal battery provides standby power for approximately two to three days.
- Can be used worldwide due to Universal Dial Tone.
- Can be used with PBX and regular telephone systems.
- 2 NO/NC trigger inputs.
Enforcer Voice Dialer - Specifications
- Operating voltage: 12VDC
- Current Draw: 20mA (standby), 60mA (operate), 250mA (siren active)
- Trigger Inputs: 2 NO/NC Inputs
- Operating Temperature: -4º~+122º F (-20º~+50º C)
- Backup Battery: 9VDC (not included)
- Number of Tel. Numbers : Up to 4
- Max. Digits per Tel. #: 32
- Case Material: ABS Plastic
- Weight: 11-oz (320g)
- Dimensions: 57/8"x4"x11/2" (148x100x39 mm)
Enforcer Voice Dialer - Downloads
|
| | |