|
FAB - Freeze Alarm Basic - Discontinued
|
Price: Replaced by the NEW FA700
Discontinued
Model Number: zFAB
Manufacturer: Control Products
Manufacturer Part No: FAB
|
Untitled Document
|
|
|
Freeze Alarm Basic - Specifications
| Power Requirements |
9 volt battery (not included) |
| Alarm Set Points |
45°F and 85°F (non adjustable) |
| Weight |
7.5 oz |
| Accuracy |
±2°C (±3°F) |
| Sensor |
Fixed set point thermistor (12 in. lead on the FA-B-ABA model only) |
| Operating Temp. Range |
-7 to 60°C (20 to 140°F) |
| Humidity |
90% non-condensing |
| Agency Approvals |
FCC part 68, ringer equivalence: 0.0B (ac) |
| Dimensions (LxWxD) |
5.94 x 3.25 x 1.75 in. (15.1 x 8.3 x 4.4 cm) |
Freeze Alarm Basic - Included
- 1 - Freeze Alarm Basic
- 1 - Instruction Manual
Freeze Alarm Basic
The new Basic Freeze Alarm will monitor the temperature of an unoccupied home, cabin, or business. If the temperature drops below 45°F(7 ° C) or if it rises above 85 ° F(29°C), the Freeze Alarm will automatically dial the programmed telephone number to alert you with a pre-recorded message. The Basic Freeze Alarm is ideal for protecting homes, businesses and cabins against winter freeze up, and damage caused by burst water lines.
Once the Freeze Alarm calls you:
Easily stop the alarm call-out once you have acknowledged the alarm by calling the telephone number of your monitored location and letting the phone ring for either 5 or 10 rings. When the Freeze Alarm answers, you’ll hear the alarm message played. When you hear this alarm message, the Freeze Alarm will then stop calling you because the unit now knows you have acknowledged the alarm. If the temperature in the monitored location rises above 45°F (7°C) again, the alarm will reset and be ready to call you should the temperature drop in the future. The number of rings the Freeze Alarm answers on is determined by a switch setting in the unit that is selected by the user during setup.
Freeze Alarm Basic - Support and Downloads
|
| | |