FloodstopNPT34 - Floodstop for Water Heaters

Prevent flooding from Water Heaters and other 3/4" applications:
The FloodstopNPT34 features a Motorized Brass Ball Valve and a standard 3/4" NPT Pipe Threaded union to accommodate almost any existing pipe. It also is equipped with battery backup to allow this valve to turn off the water supply even during a power outage! Each kit includes one 3/4 inch Brass Ball Valve with NPT threaded unions, the new battery backup controller, a water/leak sensor and an AC power adapter. Water Heaters have a limited life, then leak after years of corrosion. Water Heaters are generally considered a maintenance-free appliance, but they are also one of the single most damaging appliances in the home. Because Water Heaters are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days.FloodStop Water Shut-Off II automatically shuts off the water supply to the Water Heater and sounds an alarm, leaving all other household fixtures and appliances operational.

• Automatic motorized ball valve responds, eliminating the water supply when your leak is detected. Your home is protected whether you are at home or away.
• The system's water sensor, placed on your floor, quickly detects any leak, big or small, and signals for an immediate response.
• Floodstop protects your home 24 hours a day everyday. With two outputs, this system can be connected to an alarm system, automatic phone dialer, or both.
• Close and open the valve with the press of a button.
• Operates on AC or 4 "C" batteries.
  
  

FloodStop Specifications:

NEW FEATURES:

1. Motorized Ball Valve.
2. Controller has Battery Port for 4 C size batteries, which will serve as the Primary Power Source if a nearby electrical outlet is not available. When using the AC wall adaptor/transformer the same batteries serve as a backup power source if an electrical power interruption/outage takes place.
3. Controller has Outputs for connection to Alarm or Home Automation system if desired…. to automatically alert the property owner if the FloodStop was activated. Easily installed in ten minutes. Each kit includes two 3/4 inch solenoid valves (hose threaded with union), a simple control unit, a water/leak sensor and an AC power adapter.