|
Sensaphone 800
|
Model Number: FGD800
Manufacturer: Sensaphone
Manufacturer Part No: FGD800
|
|
|
|
|
Sensaphone FGD-800 8 Zone Alarm Dialer - Description
The Sensaphone 800 Power and Temperature Alarm. Now you can protect your home, cabin or business when you can't be there - The Sensaphone 800 will monitor your house, cottage, cabin, computer rooms, equipment centers, offices, or any unattended facility to detect power failures, temperature extremes, intrusions, water incursion, sounds such as smoke and burglar alarms, and other conditions of your choice. Also includes a relay output to remotely control alarms, devices, or to remotely control the heat.
New Feature - record your own voice message for each alarm zone!
Sensaphone FGD-800 8 Zone Alarm Dialer - Specifications
Alert Zones |
| Number of Zones: |
8 (2.8K thermistor comes installed on zone 1 for temperature monitoring) |
| Zone Connector: |
Terminal block |
| Zone Types: |
N. O./N. C. contact, 2.8K thermistor (-20° F to 150° F or -30° C to 65° C ) |
| Zone Characteristics: |
5.11K to 2.85V (Short circuit current: 1mA max.) |
| A/D Converter Resolution: |
10 bits ±2 LSB |
| Zone Protection: |
5.5VDC Metal Oxide Varistor with fast acting diode clamps. |
Built in Microphone |
| Internal Electret Condenser: |
For listening in to on-site sounds and detecting high sound levels. |
Phone Interface |
| Line RJ11 Jack: |
For connection to a two-wire analog telephone line. (6’ modular cord included) |
| Extension RJ11 Jack w/ Line Seizure: |
For connecting other devices on the same telephone line, devices connected to this jack are disconnected in the event that the 800 must dial out for an alarm. |
| Phone Line Protection: |
Metal Oxide Varistor & self-resetting fuse |
LED Indicator |
| System On: |
On steady when the unit is in RUN mode. LED blinks once every few seconds while in STANDBY mode. |
| Phone In Use: |
On steady when the telephone line is being used. LED blinks when no dial tone is detected. Off when telephone line is not in use. |
| Alarm: |
Off when no alarm exists. Blinks when an unacknowledged alarm exists. On steady when an acknowledged alarm exists |
| Battery Ok: |
On steady when the battery is in good condition. Blinks when the battery is low. Off when the battery must be replaced. |
Relay Output |
| Rating: |
Rated for 1A 30VAC/1A 30VDC maximum. |
Power Supply |
| Power Supply: |
120VAC/9VDC 60Hz 6W wall plug-in transformer w/6’ cord. |
| Power Consumption: |
1.5 Watts |
| Power Protection: |
Metal Oxide Varistor |
| Battery Backup: |
Six size-C alkaline batteries (not included), providing up to 24 hours of back-up time. |
Environmental |
| Operating Temperature: |
32–122° F (0–50° C) |
| Operating Humidity: |
0–90% RH non-condensing |
| Storage Temperature: |
32°–140° F (0–60° C) |
Sensaphone FGD-800 8 Zone Alarm Dialer - Included
- 1 - Sensaphone 800 Alarm Dialer
- 1 - Power Adapter for Sensaphone Alarm Dialer
- 1 - 2.8K Thermistor hooked up to Zone 1 for temperature monitoring
- Manual
- Mounting Hardware
- 1 - 6 foot phone cord
- 1 - Phone Jack Extension for Line Seizure Feature
Sensaphone FGD-800 8 Zone Alarm Dialer - Downloads and Support
|
| | |