|
|
FGD400 - Sensaphone 400
|
Product Options
| |
|
Sensaphone 400 with CottageSitter features!
Sensaphone 400 will monitor your home or business for temperature extremes, water problems, power failure and more, and let you turn up the heat remotely.
|
|
Sensaphone 400 Power and Temperature Alarm. Now you can protect your home, cabin or business when you can't be there - The Sensaphone 400 Dialer will monitor your house, cottage, cabin, computer rooms, equipment centers, offices, or any unattended facility to detect power failures, temperature extremes, intrusions, water incursion, sounds such as smoke and burglar alarms, and other conditions of your choice. It includes a relay output, allowing you to turn up the heat before you arrive, or remotely control other devices!
New Feature - record your own voice message!
The Sensaphone 400 replaces the CottageSitter, the Business Sitter and the Remote Control models (Models 1104CS, 1104BS, 1104RC, 1114 and Model 1104) since it includes the relay output as well as line seizure.
|
|
Features of the New Sensaphone 400
|
- 4 inputs for monitoring temperature(s), water alarms, motion sensors, door alarms, humidity etc.
- Calls up to 4 phone numbers when a problem occurs. Line seizure included.
- Phone line monitoring - If the phone line is cut or disconnected, an LED will flash. Optionally the output relay can be tripped at the same time for a local indication of a problem.
- Relay output that can be programmed to operate automatically upon alarm, or manually from a remote touch tone phone. It can be used to activate a local alarm, or used like the Sensaphone CottageSitter to control a dual setback thermostat. (See our Accessories page for Dual Thermostats)
- Security code access
- Temperature and Power monitoring to protect protect freezers, refrigerators, equipment etc.
- Recordable voice. Now you can customize each input alarm message as well as the identification message.
- Call your Sensaphone 400 using any telephone, to receive status reports and listen-in to on-site sounds
- Test your dial out telephone numbers using the keypad, to ensure each number has been entered correctly.
- Battery back up of 24 hours with "C" cell batteries, located at the front of the unit to make them easily accessible.
- Power adapter uses a standard power plug, not hard wiring, to ensure easy installation(feeding wire through enclosure openings)
- Status LED's on the unit to indicate battery condition, alarm status and phone status
|
|
A closer look at the new Sensaphone 400....upgrades from the previous model 1104. |
|
| Recordable Voice:The FGD 400 and FGD 800 have the added benefit of giving the user the ability customize the voice messages for each of the input alarms and the identification message. The messages are recorded by the user through the built-in microphone. This is a great new feature being added to the 400 and 800 products. Now that the two new desktop products have real voice programming, every Sensaphone product now supports recordable voice. |
Output: Both the Sensaphone 400 and Sensaphone 800 models now include a relay output that can be programmed to operate automatically upon alarm, or manually from a remote touch tone phone. It can be used to trip a local alarm, or used like the Sensaphone CottageSitter to control a dual setback thermostat. |
|
| Line Seizure: Line seizure is now a standard feature on the new 400/800. Previously this was an extra feature that was an additional cost. |
Phone Line Monitoring: There is a new phone circuit in the 400/800 that monitors the integrity of the phone line. If the phone line is cut or disconnected, an LED will flash and optionally the output relay can be tripped at the same time for a local indication of a problem. |
|
| Batteries: The Sensaphone 400 and 800 have a 24 hour battery backup capability just like the previous models 1104/1108, but with slightly smaller C cells instead of D cells. Also, the batteries are changed from the front of the unit, so if it is wall mounted, you do not have to remove it from the wall to change the batteries. |
Phone Test: Each dial out phone number can be tested from the keypad. When the test is being conducted, the speaker will play the sounds that are occurring on the real phone line. This makes is very easy to determine if the user needs to first dial a '9' or an '8' before the destination phone number, or other special dialing sequences. |
|
| LED's: Additional status LED's are provided on the front of the 400/800 to show battery condition, alarm status, and phone status |
Power: The power adapter for the Sensaphone 400/800 is a standard plug-in adapter, which makes it easy to feed through openings and easy to remove. |
|
|
|
|
|