Dialer for UAD Water Alarms

Water Alarm Dialer (no sensors) - Specifications

• Dialer Automatically monitors for power outages - will dial for about 3.5 hours in the event of a power failure
• Dialer's 9V Rechargeable backup battery takes 36 hours to fully charge
• Dialer will dial 6 different phone numbers
• Dialer will continue to dial out until a confirmation code is entered
• Dialer has built in speaker for local audible notification
• Dialer has microphone for recording personal alarm messages
• Capable of holding 3 different alarm messages
• Capable of differentiating between 3 alarm zones
• Use the zone differentiations and recordable messages to alert your alarm contacts to the exact room or appliance which is leaking!
• Unlimited number of water sensors can work with one dialer

Water Alarm Dialer (no sensors) - Included

• 1 UAD-300 auto-dialer receiver
• 1 12 volt, 500ma Power Adapter
• 1 9 volt rechargeable battery
• 1 6foot telephone cable
• 1 "Y" telephone cable
• 1 table mounting bracket
• 1 set wall mounting hardware
• 1 owners manual
• 1 page safety instructions

Water Alarm Dialer (no sensors)

This alarm dialer will work with as many of the UAT1000 wireless water sensors as you like. The dialer will dial up to 6 different phone numbers when an alarm condition is detected to alert you, a neighbor, your plumber etc. to a water leak or flood condition. The dialer comes with a built in rechargeable 9V battery which is used if the power goes out. The dialer will call you if a power outage is detected and will continue to call for up to 3.5 hours before the battery will die.

The UAD 300 dialer is capable of recording up to three of your own personal alarm messages into three distinct alarm zones. This allows you to program specific wireless water sensors to trigger specific personal alarm messages. For example you could record the alarm message "My sump pump is overflowing" and specify the water sensor located near your sump pump well to trigger that message! The dialer also has a built in audible alarm which you can select to activate when an alarm is detected.

Water Alarm Dialer (no sensors) - Support and Downloads

• Water Alarm Dialer Manual - UAD300
• Listen to the local alarm siren