12 Volt DC - 1 amp Adapter

Seco Larm Dialer Power Adapter - Description Power Adapter for the Seco Larm alarm dialer. Seco Larm Power Adapter - Included 1 - 12VDC Adapter

Replacement control panel only (no sensor and no transmitter) for the DA-600

The Original Drive-Alert The DA500 Drive-Alert Vehicle Detection System includes a control panel with an internal alert whistle, a sensor, and 100 feet of cable. Other lengths available from 10' up...

Dakota Alert M538-BS MURS Two-Way Base Station MURS base station transceiver that can receive an alert signal from the MURS Alert transmitter as well as two-way communications from other transceivers...

The 12VDC unregulated 500ma wall transformer/adapter has a 500ma output to power our low current accessories such as the strobes, piezo siren, and whistle. The 66" wire ends are marked red for...

WNWB350 Waterbug - Description The Waterbug 350 Model (WB350) is an excellent stand-alone water detector. The WB350 runs on a 9-volt battery and includes an audible alarm which will alert you if...

WNWB200 Waterbug - Description The Water Bug model WB200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can...

Winland High Temperature Sensor - Description Wired temperature probe for use with any of the Winland Enviro Alert Monitoring Systems. Temperature Range of: +32 to +299 Fahrenheit Comes with 23" of...

Winland Buzzer- BZ-1 - Description Wire this buzzer to any of the outputs on any Winland EnviroAlert, WaterBug, and Vehicle Alert monitoring units to receive up to 86 dB audible buzzing alerts in up...

Winland 12V- 500ma Regulated Power Transformer - Description Winland 12V- 500ma regulated power transformer for use with: EnviroAlert EA200 EA400 and EA800, WaterBug 200 and 800, and the Vehicle...