Flood Prevention

Waterbug Supervised Under-Carpet Sensor - Description Formally the WB0009, additional Supervised Under-Carpet Sensor may be placed under carpet or raised flooring to detect the first appearance of leaking water. Note: Can only be used with...

WNWB800 Waterbug - Description The WaterBug WB800 Model is an eight zone water detection system, ideal for monitoring several areas with one unit, or a large area. As many as eight supervised sensor probes can be run up to 500 feet away (or 16...

Winland Waterbug Supervised Leak Sensor - Description Additional Supervised Standard Sensor may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising. Additional Supervised...

WaterCop Single Probe Flood Sensor - Description Stop flooding before it becomes a problem with a Watercop system! Watercop sensors can be placed anywhere in your home so that you are fully protected. The following is a list of ideal locations to place...

The WaterCop RS-100 is a remote switch. Simply mount this near a common exit or entrance to your home and easily turn the water ON and OFF with the push of a button! The RS-100 connects to the WaterCop actuator and valve using CAT5 cabling and RJ45...

WaterCop Freeze Sensor - Description The WaterCop FH100 Freeze Monitor is ideal for monitoring pipes in cold temperatures and will prevent frozen and burst pipes. When a low temperature is detected an emergency shut-off signal is sent to the WaterCop...

WaterCop Repeater - Description Property owners can benefit from the protection and peace of mind provided by the WaterCop Water Shut Off System. Increse the range of your Watercop's protection by up to an additional 300 feet! Perfect for large...

The WCDFS2 is a twin probe wireless water sensor for use with the WaterCop system. Use these to monitor both under the bathroom vanity and behind the toilet with just one transmitter cutting down on cost.Can be powered by batteries or by the ACA100 power...

WNWB350 Waterbug - Description The Waterbug 350 Model (WB350) is an excellent stand-alone water detector. The WB350 runs on a 9-volt battery and includes an audible alarm which will alert you if water is detected. The WB350 can also be connected to...

WNWB200 Waterbug - Description The Water Bug model WB200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can monitor up to as many as six sensors up to hundreds of...

WNWB1041 Waterbug Supervised Under-Carpet Sensor - Description The WB1041 Under-carpet sensor works with the WB200 and WB350 models. Ideal for basements and other locations, to detect the presence of water under carpeted rooms. Sensors come with 12'...

WNWB1040 Waterbug Standard Sensor - Description Additional Standard Surface Sensors may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising. Ideal for monitoring several...