Power Supply for Seco-Larm Dialer

This product has been discontinued and is replaced by the STI-V34104.

Replacement control panel only (no sensor and no transmitter) for the DA-600

The Original Drive-Alert The DA500 Drive-Alert Vehicle Detection System includes a control panel with an internal alert whistle, a sensor, and 100 feet of cable. Other lengths available from 10' up...

Designed to notify you of FREEZING temperatures, the Freeze Alarm 700 will call you when room temperatures fall below 45°F. This device will monitor the air temperature, preventing potential damage...

Dakota Alert M538-BS MURS Two-Way Base Station MURS base station transceiver that can receive an alert signal from the MURS Alert transmitter as well as two-way communications from other transceivers...

The 12VDC unregulated 500ma wall transformer/adapter has a 500ma output to power our low current accessories such as the strobes, piezo siren, and whistle. The 66" wire ends are marked red for...

AC wall unregulated transformer/adapter has a 12VDC 1 amp output to power all of our high current sirens and for use with multiple accessories up to a total of 1 amp. The 6' wire ends are marked red...

The Mier DA066MP transmitter can be triggered by either by a signal sent to activate chimes or by pressing a button to manually trigger the chimes. It can be used as an add-on to the DA-500 or DA-600...

WNWB350 Waterbug - Description The Waterbug 350 Model (WB350) is an excellent stand-alone water detector. The WB350 runs on a 9-volt battery and includes an audible alarm which will alert you if...

WNWB200 Waterbug - Description The Water Bug model WB200 operates on 12 or 24 Volt AC/DC and has a form C relay output that can be connected to alarm panels, bells, dialers, etc. The unit can...